1. Before installation and operation, use air spray to remove foreign objects on the piping, and clean the inner surface of the piping with clean water.
2. Carefully check whether the valve usage is consistent with its performance specifications; (temperature, pressure)
3. Check the valve channel and sealing surface for debris, and remove it in time;
4. The valve must be installed in time after unpacking, please do not loosen any fastening screws or nuts on the valve at will;
5. Wafer butterfly valves must use special butterfly valve flanges.
6. The electric butterfly valve can be installed on the pipeline at any angle. For the convenience of maintenance, it is recommended not to install it upside down.
7. When installing the butterfly valve flange, it must be ensured that the flange surface and the sealing rubber are aligned, the screws are evenly tightened, and the sealing surface must fit completely; if the screw tightening force is uneven, the rubber bumps will block the butterfly plate, or the top Staying on the butterfly plate causes leakage at the valve stem.
