Structural features of the wafer pneumatic butterfly valve
Pneumatic butterfly valve manufacturers have introduced many related content about butterfly valve products for us before, and they also know that there are many types of butterfly valves, such as electric butterfly valves, pneumatic butterfly valves, hydraulic butterfly valves, manual butterfly valves, etc., among which pneumatic butterfly valves are mentioned before. of.
Pneumatic butterfly valves are generally used to control the flow of air, liquid, etc., to cut off and save. Next, the pneumatic butterfly valve manufacturer will talk to us about the structural characteristics of the wafer-type pneumatic butterfly valve.
Wafer-type pneumatic butterfly valves are mainly used for shut-off and adjustment. Because of their small appearance and light weight, they are generally used in small-diameter gate valves. In the planning of the wafer-type pneumatic butterfly valve, there is a special plan of three-way bias, so that there is no conflict transmission between the sealing surfaces. This plan extends the life of the valve.
The switch-type pneumatic butterfly valve is equipped with a sliding groove connecting tube device and a sliding column connecting tube device, and the sliding column connecting tube device is tightly sleeved with the sealed sliding slot in the sliding groove connecting tube device through the convex sliding cylinder, and then In the fixed connection operation, it will prevent the tilting operation. The operator uses the fixing bolt to fix the installation operation, which saves time and improves the operating power of the operator.
The switch-type pneumatic butterfly valve is equipped with a chute connecting tube device and a sliding column connecting tube device. During the fixed connection operation, the operator pierces the convex sliding cylinder in the sliding column connecting tube device into the chute connecting tube device. The inside of the sealed sliding slot in the equipment and the rotation and sliding operation will make the sliding column connecting tube device and the sliding groove connecting tube device closely touch, and then preventing the sliding groove from connecting to the tube device (or sliding column connecting device). The t-tube equipment) produces a tilting operation. When the connecting round hole and the internal thread connecting hole in the sliding column connecting t-pipe equipment are aligned with the fixing round hole in the sliding groove connecting t-pipe equipment, they can be fixed and connected by the fixing bolts. This saves time and improves the operating power of operators.
Wafer-type pneumatic butterfly valves also have their own methods for anti-corrosion. Wafer-type pneumatic butterfly valves can replace the material of parts and are suitable for various media. The wafer-type pneumatic butterfly valve has outstanding sealing performance, and the wonderful planning makes the sealing surface of the wafer-type pneumatic butterfly valve have compensatory properties and zero leakage.
